How would you handle a situation where a water treatment system is experiencing excessive filtration backwashing?

Sample interview questions: How would you handle a situation where a water treatment system is experiencing excessive filtration backwashing?

Sample answer:

Handling Situations with Water Treatment System Failures (Excessive Backwash)

1. Identify the Cause:

2. Check the water pressure and flow rate to ensure they are within the system’s specifications.

3. Inspect the filter media (e.g., sand, gravel) for clogging or compaction and replace if necessary.
4. Examine the backwash valve for proper operation and adjust if needed.

5. Check the water source for excessive sediment or debris that may be overloading the filter.

6. Adjust Backwash Frequency:

7. If the excessive backwash is caused by high sediment levels, increase the backwash frequency until the issue subsides.

8. Ensure the backwash duration is sufficient to effectively clean the filter media.

9. Optimize Backwash Sequence:

10. Check if the backwash sequence is performing efficiently.

11. Adjust the flow rate and duration of the backwash, flush, and rinse cycles to ensure proper cleaning … Read full answer

    Source: https://hireabo.com/job/12_0_13/Water%20Treatment%20Technician